3, in the tool bar at the top, find and click on the "flat" under the "filter" menu, in the drop-down menu when selecting the "Gauss fold" or "flat".
4, set the corresponding radius size, and then click on the "affirm" button, you can complete the feathered processing of the image.
PS how to feather the image
in Photoshop, can be achieved by the following steps, so that the edge of the image is generated from
The blurred transition effect:
copy the selection zone to the new graph layer pressCtrl+C to copy the selection zone content, click the button in the graph layer panel, and then pressCtrl+V to paste it. This step prevents the direct modification of the original picture and makes it easier to adjust it later. shrinkage zone in the new graph layer, again use the toolbar to select the content, click the top menu bar0 select → change → shrinkstrong>, enter the contraction value (such as 5 pixels).This step reduces the range of the selection area to reserve edge space for the furnace. Set the furnace value PressShift+F6 Open the furnace dialog box and enter the same number value as the contraction value (such as 5 pixels). The larger the furnace value, the wider the edge blur range, the need to adjust according to the actual effect. Remove the furnace area PressCtrl+Shift+IPH 7 Reverse selection area, press
Delete key removes the edge part, retains the center area after feathering. This time you can see the edge of the picture showing the blurred effect of smooth transition.
note:
feathering value should be set according to the image resolution and actual requirements, too easily cause the edge too blurred, too small effect is not obvious. If the overall feathering is needed, you can directly use the toolbar to select the whole picture after the feathering value, without the need for contraction steps.The edge of the image in Photoshop can make the image and background transition more natural, here are the specific operating steps:
open the image and copy the graphic layer
0 open the PS, import the image that needs to be processed.12 copy the background image with the shortcut Ctrl+J (Windows) or Command+J (Mac)Layer, keep the original graphic layer as a backup.
Create a selection zone
Select the selection tool (such as the elliptical selection tool, the rectangular selection tool, or the pivot tool).
Draw the selection zone on the image and hold the Shift key to draw a circular or square selection zone.
0 Reverse selection (optional)
1
2
3 Press Ctrl+Shift+I (Windows) or Command+Shift+I to hone the edges outside the selection zone
(Mac) reverse to select the selection area.
set the penetration radius
right-click the selection area and select "penetration".
enter the penetration radius value in the pop-up dialog box (such as 10-50 pixels, depending on the image size and effect requirements), click "determined".
0 penetration radius
1 : the larger the value, the edge transition is soft, but excessive penetration can cause the selection area content to be blurred.
2
3
4 applied penetration effectrong>
Press Delete to remove sections within or outside the selection zone (depending on whether or not the reverse is selected).
hides the background layer (click on the eye icon next to the graphic layer) to preview the final effect.
adjusts and saves
if you want to fine adjust the radius by "select-modify-fixing".
0
1 confirms the effect, combines the graphic layer (Ctrl+Shift+E) and saves the image.
2
3
4 notesg>:
is recommended to always replicate the layer before filing and avoid direct modification of the original image. High-resolution images need to properly increase the filing radius, and low-resolution images need to reduce the radius to avoid excessive fuzzy. If you use a quick filing or channel to create a complex selection area, the filing step is the same, but you need to precise the selection area first.can easily the natural transition effect of the edge of the image through the above steps.
The steps for filing the image in Photoshop are as follows:PH 6
select the filing toolg> Open Photoshop and use rectangular selector tools (such as rectangular selector, elliptical selector, query tool or quick selector tool) to create the area that needs to be quilted. After completion, go to the quilted settings through the top menu bar:
, click , “select”, “modify”
, , “quilt”, if you are using a new version of the Shift+F6.In toshop, some of the tool bars may directly contain the penetration radius input box, which can be set before creating the selection zone.
adjust the penetration range In the pop-up "penetration zone" dialog box, enter the penetration radius value (the unit is a pixel).
the larger the penetration value: the wider the border, the smoother the penetration.
0
1
2 the smaller the penetration value
3 : the narrower the border, the narrower the penetration.
The effect is more subtle.
reference suggestion :
small-size images or fine edges (such as person hair): the radius is set to 1-5 pixels .
large-size images or wide edges (such as landscape transition): the radius is set to
0 10-50 pixels
1 and even higher.
2
3 needs to be adjusted several times based on actual results.
4
5
6 Preview and apply settings>
Photoshop does not provide a real-time preview by default, but can be observed indirectly by the following methods:
first set a smaller radius value, then apply and then press Ctrl+J (Windows) or Command+J (Mac) to copy the field to a new layer to observe the level of border blur.
if the effect is insufficient, press
0 Ctrl+Alt+Z
1 (Windows) or
after confirming the effect, click on "Determinate" app fusion. At this time the edge of the fusion has been softened, but further action is needed to visualize the effect (such as filling, copying or deleting the content of the fusion).
fusion effect (optional) fusion can be further optimized with other tools:
Gauss fusion
0 : If the fusion transition is not smooth enough, click“filter” → “fuzzy” → “goose fuzzy”, adjust the radius value to enhance the sensation of softness.
sharpening: If the edge is too fuzzy, click
0 “filter”1 → 2 sharpening3 (such as “smart sharpening”), restore some details.456Layered painting: After adding layered painting, the edges are hand-laced with the soft-side painting tool to more accurate local adjustment.
NOTE:
Selection presence: the feathering operation is based on active selection area, if the feathering command is not created, the feathering command will not be available or work on the entire layer (depending on the operation context). resolution impact: High-resolution images need a larger radius to show a marked feathering effect, low-resolution imagesInstead. non-destructive editing : recommended to operate on a new layer, or to realize a layer moulding, avoiding direct modification of the original image.
extension application :
moulding transition effect : combined with a gradual tool or a layer moulding, can create a more complex soft transition (such as the fusion of sky and earth). text marginal moulding : convert the text layer to a selected area moulding, then fill the color or gradual change, can produce lighting orThrough the above steps, you can flexibly control the scope and effects of foaming, realizing the diversification needs from fine soft to greatly vague.