1, open your picture and then select "New layer" in the "Lay

1, open your picture, and then select the "new layer" in the "layer" menu.

2, in the option bar at the top, click the "filter" menu, and then select the "gothic blur" under the "blurry" category.

3, adjust the slider to make the blurry level reach the desired effect.

4, select the "blurry" in the "image" menu under the "color balance".

5. In the pop-up window, adjust the "shadow", "intermediate adjustment" and "high light" slider to make it close to the color you want.

6, select
Choose the "Fusion Layer" command in the "Layer" menu and use your adjustment to the original image.

The content steps above allow you to gradually realize the effect of graduation along the edge of the image. You can do the adjustment as needed to get the best results.

How to use Photoshop to turn the picture round and round to white

Using Photoshop to turn the picture round and round to white, you can do it by the following steps:

Open the picture and unlock the graphic layer

0 Start the PS program, click
The main interface "Open" option, select the image that needs to be edited. In the graphic layer list, click the lock icon on the right side of the graphic layer to unlock.

select center area select the left toolbar rectangular selection tool, select the center area (such as the person or the subject part) in the picture.

set the feather effect right-click on the box selection area, select

0 feather

1 option (or press the shortcut)
Shift + F6 shortcuts. In the pop-up pencil radius input box, set the number value according to the image size (such as 20-100 pixels), the larger the number range, click to determine.

re-select and delete the edge click on the top menu bar select, select re-select option (or press Ctrl+Shift+I shortcuts). At this time the select area will switch to the edge area of the image 4, press the re-select button (Delete) to delete the edge
After the edge is deleted, the image will show the natural graduation effect from the subject to white. If the graduation transition is not ideal, the feathering radius can be adjusted to re-operate.

Note:

Recommended to replicate the graphic layer (Ctrl+J) before the operation to avoid damaging the original image. The feathering radius needs to be adjusted according to the image resolution, and the high resolution image can be properly enlarged. If the background is not pure, the edge may need to be removed with a white pen to repair the uneven area.p>
with PS how to make the edge of an image into a gradual effect
with PS to make the edge of an image gradually become transparent steps as follows:
1, open the Photoshop software, click open to select the image to be modified, as shown below.
2, select the gradual tool on the left of the PS software toolbar, as shown in the arrow below.
3, select the gradual color for the front view to the background color, that is, select the white to black graduation.
0 4, select the gradual color in the gradual editor, in the red rectangle box
Select the pathway to graduate as shown in the diagram arrow.
5 , then give the desired image and add a mouthpiece, click the diagram layer to select the mouthpiece at the bottom of the task bar, as shown in the following diagram arrow.
6 , then drag the mouse in the direction of the arrow to complete the transparent graduate edge, change the range and distance can change the transparency and mouse position.
use the PS to make the edge of the image into graduate effects as follows:
open the PS and import the image
0 start the PS software, open the need to process
Picture file. Select rectangular tool drawing zone Select rectangular tool in the toolbar, draw a rectangular selection zone in the image. Notice not to cover the entire image, you need to reserve a certain distance on the four sides, leave space for the subsequent gradual effect. Set the spindle radius Right-click the rectangular area, in the pop-up menu select. In the spindle setting window, enter the desired radius value (the larger the number, the wider the gradual range).
If you do not want to change the range, you can re-adjust the radius of the range if the range is not ideal. You can re-adjust the radius of the range if the range is not ideal. You can re-adjust the radius of the range if the range is not ideal. You can re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range if you want to re-adjust the range.
After the operation is completed, select in the file menu to store or stored as, select the desired image format (such as JPEG, PNG) and save. final effect check to see if the edge of the image shows a natural graduation effect.