Removing the reflection of the image requires the use of ima

Open the image to be edited and select the "Filter" tab. Then, in the "Mist and sharpen" section, click on the "Goose Mist" option. In the pop-up window, adjust the radius size until most of the reflection is eliminated. Save the image after editing.

ps How to remove the reflection?

Remove the reflection in Photoshop, you can reduce the color concentration of the reflection area by adjusting the color saturation, here are the specific steps:

Tool / raw material

(window to
s7 for example)Photoshop7.0

method/step

open photo: Start the Photoshop software and the photos that need to be processed will be opened in the PS page. go to the adjustment menu: click on "Image" in the top menu bar, select "Adjust" in the dropdown menu, then select "Color saturation" option. absorb the reflective part color: in the pop-up "Color saturation"
In the adjustment window, use the absorption tool to extract the reflective part of the color that needs to be processed in the photo. At this time, the absorbed color can be seen below the left of the window. adjust the saturation and brightness: select the color that has just been absorbed, properly reduce the saturation and brightness of the color.Reduced saturation can make the color of the reflective area faint, the brightness adjustment can further improve the reflective effect, the specific parameters are adjusted according to the reflective situation and the overall effect of the photo. contrast processing effect: After completion of adjustment, open the historical record panel, through the operational record comparison
Before and after the photo change, see if the reflection is effectively removed, and if the effect is not ideal, continue to fine-tune the parameters.

summary

first place the photo on the PS. Then operate the absorption tool to absorb the reflection area on the photo. At this time the saturation and brightness of the area can be appropriately reduced.

attention to the subject

when adjusting the saturation and brightness, pay attention to moderation, excess adjustment can cause the photo color deformation or the reflection area to not coordinate with other parts of the photo.
The color composition is different, the processing needs to flexibly adjust the parameters and the operation method according to the actual situation.

ps How to remove the reflection

Remove the reflection method is to first open the ps, import the image, then click on the "image", select the "adjustment"- "color saturation", in the frame can modify the parameters. The word reflection has two meanings, one refers to the phenomenon of light injected into the material surface reflection, the human tube this phenomenon is called reflection.

2 refers to the light source released into the material surface and change the direction of reflection reflection, short reflection of dark matter in the universe and black hole, black body.
Except, the surface of any material, including the transparent material, will be reflected.

Remove the reflection in Photoshop can be achieved by adjusting the color phase saturation, here are the specific steps:

open the photo: start the PS software, import the photo that needs to be processed. enter the adjustment: click the "image" in the top menu bar, select the "adjustment" in the drop-down menu, then select the "color saturation". absorb color: use the aspiration tool
The reflection part of the photo, at this time on the left side of the adjustment panel can see the absorbed color. adjust the parameter : in the color saturation adjustment panel, select the color just absorbed, properly reduce its saturation and brightness to reduce the reflection effect. contrast effect : open the history record panel, view the operating records, compare the photo effects before the treatment, ensure that the reflection is effectively removed and the overall effect of the photo is natural. summary : by the above steps, it can be effectively removed from the photo
Improve lighting and improve photo quality.