3, use of filters: many cameras and image editing software offer a variety of filters, one of which is "brightness enhanced", can significantly improve the brightness of the image.
4, use of lighting: if the picture is in the field, can adjust the position, angle and intensity of the light to affect the brightness of the image.
5. manual focus: in the case of insufficient light, manual focus can make more
More light enters the camera, thus increasing the brightness of the image.
The above is a way to improve the brightness of the image, the specific choice of which method depends on your situation and needs.
How to adjust the brightness of the image in the Word document
Today, the article introduces you to the way to adjust the brightness of the image in the Word document, hoping to help you.
specifically as follows:1. First, please find the Word icon in your computer, click into the main interface, then build a new blank document, or directly target the text.
The second step, then select the insert button on the screen, then select the image option, the target image can be opened.
3. The third step, the brief here is with two pictures, so it is easy to compare.
4. The fourth step, as shown in the picture, please select the image you want to adjust, then click on the small sun sign on the left top of the screen, it is not difficult to find, there are two small suns, each for the plus and minus icons, corresponding to the brightness and shade.
5. The fifth step, please adjust according to yourself, until you are full.
In order to do this, you can adjust the brightness of the image through the "color" option in Word.
above is the way to adjust the brightness of the image in the Word document.
AI how to adjust the brightness of the image?
can adjust the brightness of the image through the "color" option in Word, the specific operation is as follows:
insert image in the Word home page click on the "insert" tab, select "image" and insert the target image from the computer. selected image0 click on the image inserted in the document to ensure that the image is in the selected state.
In this case, a control point will appear around the image). Open the color adjustment option Click on the " Image Format" tab in the top function bar (some versions appear as "Format"), then click on the " Color" button. Adjust the brightness or saturation of
method one: directly select the brightness style0 in the drawing menu under the color "
1 color variantng>" area, select the pre-set bright style (such as " corrosion" or " bright" series) to highlight the image quickly. method 2: indirectly highlight by saturation in the " color saturation" option, select0 high saturation style1 (such as "2 saturation:400%3 ").
After that, the image color is brighter, visually appears brighter, especially suitable for dark but color-rich images.
note:
If the pre-set style effect is insufficient, the right-click image can be selected " set image format", manually adjust the brightness parameters under " image correction" in the right-hand panel (Word 2019 and above versions support). adjustment suggests real-time preview effects, avoid excessive highlighting resulting in detail loss or color misrepresentation.This method is applicable to Word 2010 and later versions, the lower version operating path may vary slightly.
follows how to adjust the brightness of the image in the AI, hopefully this guide will help you.
1, start the AI software, build new documents; go to the operating interface.
2, drag the image directly into the AI.
3, then click the "embedded" button as shown below.
4, then press CTRL+C to execute copying commands; then press CTRL+F to stick to the previous command.
The slice overlap together.
and then press SHIFT+CTRL+F10; expose the transparency panel.
5, as shown below, click the drag button, select in the pop-up menu: filter
6, select the filter color, then look at the picture in the board, has been illuminated.
7, close the transparency panel, click the file menu, then: export, then: export as
8, set the address in the pop-up dialog box and save the type and then export.