1, open CorelDRAW and import the image you want to cut.
2, in the menu bar when selecting "Editing"> "Select Tools", then use the mouse click or drag to select the portion you want to cut.
3, in the menu bar when selecting "Object"> "Cut", or press Ctrl + X on the keyboard, which will start the cutting process.
4, you can preview your cutting effect in the cutting window on the right and make the necessary adjustments.
5. When you are satisfied with the cutting result, you can click the "Safe" button using the cutting
Cut.
Please note that the cutting operation is irreversible, so make sure your choice is correct before you start.
cdr How to accurately cut the image
Can be done in CDR by following steps:
Open the graphics: Start the CDR software and open the graphic file that needs to be cut.
0 Draw the penalty cutting shape
1 : Use the tools of Basel, pencil tools or art pencil tools to draw the necessary cutting shape on the graphics.
The shape will determine the area of the final cutting. Select the image and effect: Select the image that needs to be cut with the selection tool, then select the "effect" in the menu bar - "cutting the frame precisely" - "placed in the container". Place the image in the shape: After the previous operation, the mouse turns black to the right, then click the mouse in the shape just drawn, the image will automatically cut according to the shape. View the cutting results: After completing the above operation, you can see
To the graphic has been cut in accordance with the shape drawn.
cdr How to cut the part of the image you need
cdr graphic box to use the precise cut steps are as follows:
Open the software and import the image: first open the cdR software, newly built the file and then copy an image into the work area.
0
1
2 Draw a closed curve
3 : use the Basel tool to draw along the edge of the target object (such as the cube)
Close the curve, as the container boundary of the cutting.
Execute the graphic box precisely cutting: click on the "effect" of the top menu bar, select "Cut the box precisely"→"Put in the container", and place the image within the closed curve of the drawing.
Edit the cutting content: again click on "effect"→"Cut the graphic box precisely"→"Edit the content", go to the editing mode and adjust the image position.
0 Align the image with the boundary
1 : in the editing mode
Moving the image below makes the target object edge perfectly aligned with the closed curve.
End editing: After confirming the alignment, click “effect”→“diagram box precision cut”→“end editing” and complete the cutting operation.
Note that the closed curve needs to completely surround the target object, otherwise the cutting may not be complete. In editing mode you can adjust the image location at any time, but you need to confirm the alignment before finishing the editing. This feature is for cdr2022 and higher, operating logic is similar
.
Cut the required portion of the image in the CDR can be implemented by the PowerClip (precise cutting) function, the specific steps are as follows:
Start CDR software (such as CorelDraw 2018), click "file" → "import", select the image that needs to be cut and determine, place it in the canvas. Select the "Rectangular Tool" (or "Olivier Tool" "Multi-edge Tool" etc.) in the toolbar, draw a PH 7 on the right side of the image
Cut shape (such as square, circular, etc.). The shape size needs to cover the target area, then adjust. The right-click mouse click on the image, drag it to the middle of the rectangle, loose the right-click and select "PowerClip inside". At this time the image will be cut to the rectangle range, but the location may not be accurate. The right-click on the image after the cut, select "Edit PowerClip" into the internal editing mode. This time you can drag the image, adjust the display region to the target location. After the adjustment is completed, the right-click image select "Finish editing PowerClip", exit editing mode.
If you want to further modify the shape of the cutting, you can select the object after the cutting, select the right button for "Editing PowerClip" and adjust it again.
Note:
CDR versions (such as X4, X7, 2019, etc.) all support the PowerClip function, operate logically consistently. Cutting shapes are not limited to rectangles, you can create custom shapes using "Olivia Tool", "Multi-edge Tool" and so on as required. If the edge of the image after the cutting is blurred, you can right-click the object to select "PowerClip" → "
Extracting content", for vector mapping or high-resolution import optimization of the original map.