The method of rotating images with Word is very simple

Open the Word document, then click on the "Insert" tab, in the drop-down menu when selecting "Image", then in the pop-up dialog box find the image to insert, click on the "Insert" button. On the image, right-click the mouse, select the "spin", can be rotated at 90 degrees, 180 degrees, 270 degrees and so on as required.

word document image how to spin

to rotate the image in the Word document, you can follow the following steps:

first step: insert image open
To spin the Word document for the image, click the "Image" tab in the "Insert" menu bar, select the image that needs to be rotated and open it.

Second step: switch to the "Format" tab After clicking on the image, the top menu bar will automatically switch to the "Image Tools-Format" tab.

Third step: select the direction or angle of rotation in the "Arrangement" group, click the "Rot" drop button, select the pre-set option according to the requirements:

0 to rotate to the right 90
°: Picture rotates 90 degrees.

rotates 90 degrees.: Picture rotates 90 degrees.

vertical rotates: Picture rotates along the horizontal axis.

0

1 vertical rotates

2 : Picture rotates along the vertical axis.

3

4

5 Fourth step: custom rotating angle (optional)

6 If the default option does not meet the needs, click "Other"
In the pop-up “Setting Image Format” dialog box, find the “Rot” input box under the “Size” tab.

directly enter a specific angle value (such as 15°, 45°, etc.) or adjust it through the fine-tuning button.

click “off” to complete the setup.

Step 5: After the verification effect rotates, the image shows the adjustment results in real time. As shown in the effect diagram below, the image has been rotated in the specified angle.

0

1

2
ng>:

rotating operation only affects the image display and does not change the original file content. For precise control of angle, it is recommended to use "Other rotating options" to enter specific values. Operation for Microsoft Office 2013 and later, the earlier versions interface may vary slightly.

How to rotat the image in Word?

How to rotat the image in Word can be achieved by the following method:

Method One: Hand rotating

How to open the Word document, turn to
Insert the page of the image. The image to be selected to be rotated, a round arrow icon will appear right above the image. Select the icon by clicking the light and drag the image to the center of the image as the original point.

Method 2: Set fixed angles using the tab

Switch to the page layout tab and find the "rotating" command. In the drop-down menu, select pre-set angles (such as 90°, 180°, 270°), the image will be rotated at the specified angle.

Method 3: Precisely set

through the dialog box
Select "Other rotating options" from the menu and pop up the "Layout" dialog box. Hand-in the dialog box enter the rotating angle value (such as 15°) while adjusting the scale ratio and other parameters.

Method 4: Open the dialog box by right-click menu

Right-click the selected image and select "Size and location" in the shortcut menu. The "Layout" dialog box will also pop up, followed by action and method three.

Method Fifth: Switch to "Image Works" after selecting the image via the Image Tool Format tab

If you do not want to do so, you will be able to find the "rotating" command directly in the functional panel below, and the operating logic is the same as the method.

Note

Different versions of Word may differ in the operating path, if the corresponding function is not found, it is recommended to check the name of the tab or update the software version. After rotating the image quality will not be damaged, but over-rotating can cause layout errors and need to adjust the way the word is rotated in time.

Rotating the image in Word can be achieved by the following steps:

1. Insert the imageOpen the Word document that needs to be edited. Click the tab on the top menu bar to insert the tab, select the button in the illustration group . In the pop-up dialog box, locate to the image storage location, select the target image and then click on insert . Click the Document after activating the image tool 10 .
In the image, at the top of the menu bar, the Image Tool (formatting) tab will appear. If not, click again on the image to activate.

3. In the Image Tool tab, find the arrangement group , click the 0 spin button in it. After popping up the dropdown menu, select the following rotation mode: 2rong> rotating to the right 90°: the image rotates the clock at 90 degrees.

rotates to the left 90°: the image rotates the clock at 90 degrees.

vertical rotates: the image rotates upwards and downwards along the horizontal middle axis.

0

1 horizontal rotates

2 : the image rotates right along the vertical middle axis.

3

4

5 4. Precise adjustment angle (optional)

6> To customize the rotation angle, you can right-click the image, select the size and location . In the pop-up dialog box, switch to the size tab, enter the specific angle value (such as 15°, 30°, etc.) in the rotation input box, click to determine .
File. To revoke the rotation, press the combination keys Ctrl+Z or re-adjust the rotation angle. Frequent rotation may cause the edge of the image to be blurred, and it is recommended to save the backup of the original file.

Through the above steps, you can quickly the horizontal, vertical or arbitrary rotation of the image to meet the document layout requirements.